开云体育

I am applying it in shop . First time used the niosh ov/sd/hc/cl filters on my mask. These are ~15 yrs old. Did not smell a thing until i took them off before leaving the shop, so I guess they work. I

It’s great stuff. The first coat dries in a reasonable amount of time, depending on your weather conditions, but subsequent coats take forever to dry if you do full coats in cold temperatures, so

I have no great experience in finishing but I have to say that I have not used anything that is so easy and quick to apply. Off course I have only applied the first coat and 3 coats are required but I

Greg: Are any of the Rangate items still available? If yes, which ones? Thanks, Fred Rossi

Yup, rear corner of the intake side. I have been pulling the bin before i can see the chips in window and still get the pile on floor. I have pulled the bin way before it is full and can see the it

This is the tap and die holder I made for my lathe - including drawings if you want to make your own. Adjust a bit more sophisticated than Joe Pie’s. https://www.flickr.com/gp/davidpbest/gn391W

Imran, Did overfill the bin today and I got a lot of dust falling down when I pull the drum. As the bin was more than full on the right (where you have the intake in my RL140), it makes sense for the

I had not given this much thought, but it takes 2 to bid something up. It was stated that the winning bid has no buy/sell history. How about the other party that was involved? Imran

Yes – Same here although it’s in my back yard in Austin, TX. Regards, Chris Perren Sent: Saturday, January 2, 2021 12:49 PM To: [email protected] Subject: Re: [FOG] Broken Tap David Best

David Best introduced me to this channel on youtube and I'm working through his videos in preparation to start playing with a new mill and lathe. Found this video and wanted to post here as an

I know, that’s why I just gave up after trying 5-6 times. I was just shocked to see it go up to nearly 2k

I have a couple Balcrank that work fine for many years martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

Jason. same for the accounting business. At 66 there are still parts I really enjoy and parts I have less tolerence for the ever. Signs of aging. The work ethic thing is what bothers me and my clients

Perry White sure wasn't a woodworker. I've been at it 25 years now and I enjoy it as much as ever. Sure there are parts of running a business I don't care for, but that would be the same in any case.

I have to say this takes Frugality to a new level , thanks for the tip LOL ?mac,,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

Todd, I feel a lot better knowing that the switch came from Felder. It may be a pain but i am sure you will get it right. I have a feeling that Joe is right. If they sent it with jumpers, those were

Curious to know what that costs new and what it will go for. FYI. ?The listing says $45,000 CDN ($35,349 USD) new. So interesting to see the 6k USD current bid. ?Makes you think it will be a steal,

Thanks, Joe and Imran I bought the new switch from Felder. It was specified after their technician did his on-site troubleshooting to determine that it was, in fact, the switch causing the original

The shipping will be added to the KF700SP so not sure exactly, but there was an EOY special on the sander and he took the VIP off the accessories and also gave me a deal on the sander too. PK

It was supposed to be on accessories and parts only…. Brian Lamb blamb11@... www.lambtoolworks.com