开云体育

Imran, looks like the same handle, here are some pics. Might be due to the round over I have in any case no issues taking on/off. Regards, Mark https://www.instagram.com/kessler_woodworks/

This how I have my Hammer F3 Shaper and A3-31 connected https://hosting.photobucket.com/albums/i452/cedwards874/Woodworking/.highres/DustPort2_zpsfyqylx7i.jpg

if this does not fit 120mm OD connector yoh can use short section of 5” hose to adapt to 4”

A few years back, I bought a few from the Blast Gate Company for less than $20 each. They can make any connection you need. Regards, Chris Perren 512-415-6951 Sent: Monday, November 30, 2020 5:03 PM

can you use 5” hose instead? it should fit 120mm OD. imran

I 3D printed mine. If you are in Canada I can print one for you. Envoyé de mon iPhone

A while back I think I saw mention of a source for DC adapters, but can't locate it. I have a jointer output port that's 120MM o.d and I need to connect to 4" flex hose. Any pointers on where to go

There is a more recent one with Betty White that is on utube as well. Sent: Monday, November 30, 2020 11:46 AM To: [email protected] Subject: Re: [FOG] Last Call for Slider Nuts That was

Brett, Thanks for the boom pic. I could not connect text to the previous pic. BTW, you found the same orientation best as I did. Locating laser on the saw guard made it faint 10ft away and really

David Davies - the Frame Press is a Soukup FP32.21 from Soukup America, contact through Greg Godbout at Rangate for inquiries - I received it earlier this year and I cant express the extent of"better"

That was always my favorite time frame for SNL.? Thanks for the laugh.

Brett, thanks for sharing details. i am not following this part, “Changes to be made: add a metal boom from overhead guard to make a fixed mount” did you not use the magnetic bracket that came

Brett, OK...ordered one. What is that vertical clamping unit in the background? Thanks, Dave Davies

All, This is where I am with laser kerf - it is cheap, it works great! 1. Purchased this crossline laser level, green light, for combination of features including rechargeable battery, locking

question to the smart folks. if belt is lose, can belt slapping happen on either side of the belt? i ask because the belt side that is slapping should be in tension based upon the direction of

Years back a old friend had a oak moris lounge chair in an out building and assume it was a porky that loved the old varnish and did a superb job of carving the whole darn chair.

Hi Mac, Thanks for posting pictures, impressive work on tapered and bevelled drum and utensil holder, the drum especially I am thinking would of been no small task but certainly worth the effort for

Yes, I have looked at the manual with the exploded views and all looks like the drawings show. It is interesting that the manual does say a possible cause is the wrong belt. I will be trying to

Must be wongbelt if you adjusted all the way Have the belt no when you talk to tech Don’t u get a book with exploded views and parts no? Mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave.

Thank you Brian.? I will take a close look at what you suggest.? I am in contact with a tech, Jason, at Felder.? I hope to talk to him again tomorrow. I will post what I find on your suggestions.