开云体育

Brett, Thanks for the boom pic. I could not connect text to the previous pic. BTW, you found the same orientation best as I did. Locating laser on the saw guard made it faint 10ft away and really

David Davies - the Frame Press is a Soukup FP32.21 from Soukup America, contact through Greg Godbout at Rangate for inquiries - I received it earlier this year and I cant express the extent of"better"

That was always my favorite time frame for SNL.? Thanks for the laugh.

Brett, thanks for sharing details. i am not following this part, “Changes to be made: add a metal boom from overhead guard to make a fixed mount” did you not use the magnetic bracket that came

Brett, OK...ordered one. What is that vertical clamping unit in the background? Thanks, Dave Davies

All, This is where I am with laser kerf - it is cheap, it works great! 1. Purchased this crossline laser level, green light, for combination of features including rechargeable battery, locking

question to the smart folks. if belt is lose, can belt slapping happen on either side of the belt? i ask because the belt side that is slapping should be in tension based upon the direction of

Years back a old friend had a oak moris lounge chair in an out building and assume it was a porky that loved the old varnish and did a superb job of carving the whole darn chair.

Hi Mac, Thanks for posting pictures, impressive work on tapered and bevelled drum and utensil holder, the drum especially I am thinking would of been no small task but certainly worth the effort for

Yes, I have looked at the manual with the exploded views and all looks like the drawings show. It is interesting that the manual does say a possible cause is the wrong belt. I will be trying to

Must be wongbelt if you adjusted all the way Have the belt no when you talk to tech Don’t u get a book with exploded views and parts no? Mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave.

Thank you Brian.? I will take a close look at what you suggest.? I am in contact with a tech, Jason, at Felder.? I hope to talk to him again tomorrow. I will post what I find on your suggestions.

How much clearance does the side of the belt have from the wheel and any sheet metal the belt goes past? Are the upper and lower pulleys lined up with each other? Lay a straight edge along the lower

The drive belt on my AD 741 seems very loose when running.? Also it appears to me more noisy than it should be.? I have only had the machine for a short time and am not sure what is "normal". I have

i did not but since it is holiday season ... https://youtu.be/bPpcfH_HHH8

Whatcha making? Mike King NERA Economic Consulting +1 303 618-4915

Did someone say T-nut? David Best https://www.flickr.com/photos/davidpbest/albums https://www.instagram.com/davidpbest/

It will also gall running against the aluminum of the slider. Brass if you don’t want steel. Brian Lamb blamb11@... www.lambtoolworks.com

Welcome to group! I had a BF6 31 in think 90. Cute little thing quite handy. Hammer has a better jointer,planer, I didn’t care for the 6 series J/p fact is I never sold any j/p only till 2000 and 7

Larry’s slider is Perfect example , my design will have 12.65 mm of purchase with a bar 5/16 would only give .003 clearance not going to work .just few threads in the bar Mac,,