开云体育

I’ve got the Kreg foreman. I use it a lot and it works pretty well. It was one of those tools I thought was nice to have but now it is essential to me. It can be improved in several ways aside from

The yellow light is a great diagnostic tool. it will tell you if any switches are stuck. Brian Lamb blamb11@... www.lambtoolworks.com

I have several Kreg jigs as well as the Castle TSM-12 https://castleusa.com/products/a00013-tsm-12-benchtop-pocket-cutter-machine.html , my preference is to use the Castle as much as possible. The

Just purchased the TSM-22. ?It is in stock not far from me, so I will go now to pick it up. ?Too bad Castle does not sell mobile bases. ?I will definitely want one. ?I could make my own with 4

Sorry Joel not helping but wanted to thank Randy for the Kreg comment. imran

i replaced start and stop switches when the start became intermittent on my K975 saw - basically when i bought it used. i did not call felder as they were readily available online. Not expensive and

Hey Toby, I've had the shaper stop button not reset before. The spring loaded button will return to its original position but the switch itself would not return to its normal resting position. It

You guys are awesome. So many great ideas. I got pretty frustrated yesterday and moved to another project. It’s funny how so many projects in my shop still require this saw/shaper. It seems that

I have the air actuated Kreg, but it's also an early model..make basically no noise.? As for that famous "Kreg Kreep" mentioned, I have the face frame assembly table with pneumatic hold downs and

/g/felderownersgroup/topic/36264995#78665 Interesting on the noise comparison. In the linked thread, it is suggested that the air motor for the pilot hole may even make more noice

i remember seeing a video that showed that predrilling with 1/8” drill solves the shifting issue with kreg. if is not a solution for production guys but if it works it would work for me, an

I have used the 21 in a production environment. They are not quiet. They do what they're intended to do, and do it well. I prefer a pneumatic tool over the whine of those two routers. I have a Kreg

I have used both systems. In the case of Kreg, I have used their portable kit where the custom two-step bit is driven by a handheld drill. In the course of a faceframe job, I got so frustrated with it

Hoffman dovetail machine ? Sent from my iEye

I have the Zeta. I did not think that having the Zeta would be an effective substitute. Maybe I do not use the Zeta to its potential. ?For 1 example I am making face frames 2 1/8 wide rails and

Hi Joel, I have you looked into Lamello Zeta system? martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

I am interested in getting a pocket hole machine. ?I have a Kreg foremen and do not like the movement-offset associated with the 10 degree house. ?Thanks David for the useful comments. ?Since this

Probably too easy, but.. Have you checked that the blade cover is properly closed?

Oh yeah, that happened once too - the stop switch on the table saw. i bypassed it, and viola, no problem.

Hi Toby,This?happened to me in the past, and it turned out to be a bad stop switch. Felder walked me through finding which one was the problem, then walked me through bypassing it temporarily until a