Anyone ever use one for beaded face frames. If so i have a few questions before i take a long drive and or waste my time and money.
I was also going to start a pneumatic blast gate topic. The more important issue at the moment is the Morso machine but why clog up the forum with two threads. We all get these emails so im sure the thread will get read top to bottom by most.
Anyone use the pnuematic blast gates and have any thoughts to offer. Also inwould like to get my single phase RL setup to remote start or some kind or setup so im not walking back and forth across my shop all day.
Felder has auto start units for single phase machines now. I feel like a read something negative about them recently though?
The pneumatic blast gate question is inline with my last thread asking about plumbing air lines. I started thinking long and hard about my future air needs with regard CFM and not over or under sizing my lines or compressor.?
Long term i could see the use for air as goes. Air clamps, nail guns, blast gates, filter cleaning of the RL. I will also add a brand new Martin slider TS and shaper to my shop, maybe a widebelt. Im not sure any of these machines need or can be outfited to air. Like if i get the Martin T75 Prex and i get the lubrication function for cutting metal does that operate off compressed air? If so what kind of PSI and CFM is required. Even the Morso machine can be had with a pneumatic option.?
