Re: Morso guillotine question
|
Hi David,? My air pulse system has its own compressor on the Dust Hog and builds each individual programmed charge.
I don't think my system is as large as yours though.My unit puts the charge ?through a venturi that increases the blast from the inside out from in the filter to dirty side to drop into the hopper. mac,,,
?? ? martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330 cell 608-824-0023 fax
Designing and building for 46 years
From: "Luckensmeyer David dhluckens@... [felder-woodworking]"
To: felder-woodworking@...
Sent: Sunday, February 5, 2017 4:28 PM
Subject: Re: [felder-woodworking] Morso guillotine question
?
The exception may be the filter cleaning option for the RL units.
Indeed. Definitely the exception. The pulsed air cleaning system on the RL250 seems to take all the air it can get. I have a 17 CFM rotary compressor and a 400L receiver, kept between 100-140psi.
If the receiver happens to be near 140psi when the cleaning cycle kicks in, then the compressor does not have to supplement the receiver. Under 130psi, and enough air is used to require a receiver top up.?
Also, there is a distinct difference in the cleaning "power" of the RL cleaning system at high pressures versus lower pressures. This is anecdotal only, but the cleaning system is much louder (bang bang!) at those higher pressures.?
Without a big receiver, you're going to need a fairly biggish system to keep up with the RL250s air needs. IMHO.?
|
