If you have 125mm drops already without seeing the actual configuration I would run 2 of them and reduce at the machine. An alternative would be to run a new ?flexible 160 drop that divides with a Y into 2 100mm at the machine.
On Fri, Feb 3, 2017 at 3:28 AM,
jonathansamways@... [felder-woodworking]
<felder-woodworking@...> wrote:
?
I'm about to hook up a drum sander in my shop.
The two top ports on the drum sander are 100mm
The sander needs to be mobile so tubing needs to be flexible (two pieces of flex both approx 2meters long)
My main duct is 160mm with drops at 125mm.
My question is do I go flexy 125 mm or 100mm to the machine.
Or any other suggestions?
Thanks in advance.
Jonathan
