开云体育

?

I did the same basically 2 for the price of 1 Felder. I use them on the FB600, F700Z, and my AD951.?

John

JMK Services?

-------- Original message --------
From: "David Davies myfinishingtouch@... [felder-woodworking]" <felder-woodworking@yahoogroups.com>
Date: 2016-12-05 9:34 PM (GMT-05:00)
To: felder-woodworking <felder-woodworking@yahoogroups.com>
Subject: Re: [felder-woodworking] Extension Table

?

I ended up buying an Aigner extension fence from Carl at Martin.? I can't remember exactly ?now and their e-shop is down but I think it was about half the price of the Felder.

On Mon, Dec 5, 2016 at 7:36 PM, mac campshure mac512002@... [felder-woodworking] <felder-woodworking@yahoogroups.com> wrote:

?

I find it utterly amazing that you purchased a machine and an extension table at a minimum ?6x20"cast table was not part of your purchased.

?The table ends abruptly in less than a foot from spindle center line.

This is the responsibility of your sales person,,, period.

Like buying a saw with no blades what the hell. ?

mac...

?

martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330 cell

608-824-0023 fax

airtightclamps@...

Designing and building for 46 years

---

From: "James Zhu james.zhu2@... [felder-woodworking]" <felder-woodworking@yahoogroups.com>
To: felder-woodworking@yahoogroups.com
Sent: Monday, December 5, 2016 7:18 PM
Subject: Re: [felder-woodworking] Extension Table

?

I observed the same thing, extension table is 100% needed on the KF 700. I need to order one too.

I think it is F-channel extension table.

I have the wide aluminum F-channel extension table, I use it on planer and bandsaw, but too wide, can't use it on the outfeed end of the KF.

James

On Mon, Dec 5, 2016 at 7:32 PM wildcoach@... [felder-woodworking] <felder-woodworking@yahoogroups.com> wrote:

?

Hi Everyone,

I have a current year KF700SP (delivered 2016) and want to put an extension table at the end of the shaper outfeed but I don't know what connection type that is.? There is a short connection bar that is used to attach the power feeder lift that has room for a small width outfeed table.? Can anyone tell me what style of connection that is and whether Felder makes an extension table for this point? I see a couple in the catalogue, but can't tell which one would work for my application.

Alternatively, if some other company makes an outfeed table, or there are plans to make one, please let me know.

Using a power feeder on the shaper without an extension table provides very little room to catch the outfeed stock, plus I worry that longer stock will get pulled down by gravity at the leading edge and lift up the stock at the cutter head.

As always, your assistance and advice is really appreciated.

Warmly,

Bill White

SoCal (Orange County)

--

Dave & Marie Davies

318-219-7868