Felder sells a couple F coupling kits that work just fine and they can allow for taper draft on the edge of the table and they offer at least half a dozen different extension tables that are also independently adjustable so you can set them so they are flush with a table or a hair under.
Mac,,
Designing and building for 50 years
toggle quoted message
Show quoted text
On May 10, 2025, at 9:06?PM, joelgelman via groups.io <joelgelman@...> wrote:
?
I find it very unfortunate that with the Aigner, there is no adjustability. ?If that rail is just slightly too high, and an outfeed table is mounted, the wood will catch on the proud outfeed table. ?I remember once drilling larger diameter holes in a rail to give a little wiggle room for fine adjustment.
?
On a subsequent mount, I checked, and double checked and triple checked the locations to drill the holes... and I also got lucky and it worked out well.
