Re: Replacement of internal dust hose is K3 Hammer slider
|
Hi Brian, I'm away from my shop for a bit, but would like to give this print a try when I get back, so can you forward the .stl? thanks!
I had some time yesterday and using the sketch provided by Jim, I redesignedd the duct adapter. I can provide the stl file if someone wants to try it themselves, I can print one, but have no machine to try it on. You will need to install two 5mm heatserts as I designed it so that no hose clamp around the rectangular portion will be necessary. It uses two 5mm x 45mm long bolts to pinch the adaper onto t he sheetmetal portion.
I'm attaching a 3D PDF file, you have to download it then open it and you should be able to view and rotate from any angle.
On Monday, February 3, 2025 at 01:57:03 PM MST, ibsenafshar < brian@...> wrote:
1999 C3-31 uses 100mm hose. If an adapter as is being discussed became available I would buy one.?
--
Joe Slater
michigan
|
joe slater