Hi Imran,
?
Try holding the triggers down (without nails) and see how long the driver blade extends. If it
extends 1/8¡± or so, you can put a slight bevel to the driver blade ¡®back to front¡¯ which tends to solve the problem. ?I do this to all our nailers/staplers. ?To avoid ¡®shiners¡¯ turn the tool 90 degrees so the
nail cuts across the wood grain.
?
Back when I worked for Senco, we rarely ran tools over 95 psi as it increased repairs, and in
those days we drove our van to the job site, and did it for free¡
?
Mike
M.E. Blake General Contractors?
