Air Handling systems ?contact Ka
Designing and building for 50 years
toggle quoted message
Show quoted text
On Dec 8, 2024, at 6:10?PM, mac campshure via groups.io <mac512002@...> wrote:
?
Just ordered the right part from our handling systems talk to Kay
Designing and building for 50 years
On Dec 8, 2024, at 6:07?PM, John Whitley <john@...> wrote:
?
Hi Andrew,
?
There¡¯s a rivet, but the head isn¡¯t large and is under a lot of caulk/epoxy gunk at the seal at the bottom of the inlet. (Dear Felder, this could be a lot cleaner.) The adapter fit has never quite gotten far enough around the inlet for the rivet head to register as a problem (or not).
?
I like your idea of using a short section of hose to adapt the machine to the ducting. I have a small complication in that the ceiling to inlet drop isn¡¯t 90¡ã to the floor ¨C it angles upwards to hit the line the first section of trunk needs to be on. ?That suggests wanting a little mechanical support on the bottom end, but I can rig up something if need be.
?
I¡¯ll see what my Nordfab vendor has to say, and report back if they have any helpful suggestions, in case anyone else hits this snag.
?
¨C John
?
