Re: How do I make this molding
|
Hey Imran,
Will the moulding be painted like the example? Also, do you have a closer photo??
If the final moulding will be painted, then i would do it in two pieces. The front dentil moulding would be one piece. This allows you to run through a dado and achieve the squared?profile in one shot. The second piece is simple flat stock that appears to be taller than the dentil moulding. Once painted they will appear as one moulding. As for the small groove separating the dentil pieces, can you see how deep it is? If it is just a simple shadow line, then you can make a nonthrough?cut at the table saw/radial arm saw. If that skinny groove goes full depth, then i suppose you are gluing a ton of separate dentil pieces with a spacer. This seems like a PITA. I just did a similar dentil moulding for an exterior door and i am interested in how the pros approach it. I did all my cuts with a dado stack at my oliver 232. I made it out of one solid piece of sapele, and this ended up requiring a decent amount of cleanup in very tight nooks n crannies. In hindsight, i would have chopped the moulding up into many different pieces in order to make sanding much much easier. I dont?appreciate the grain continuity as much as i thought i would.?
Patrick On Tue, Oct 29, 2024 at 10:19?AM jontathan samways via <jonathansamways= [email protected]> wrote:
Imran , I presume you didn’t have CNC. I don’t and this is how I would attack it …..first shape the length of moulding to required shape. I would then make a jig for the router, you would need to cut in from 2 directions to get rid of the round shape of the router cutter. Finish the inside of the cut/hole with chisel. Last job is the cut the division…….These type of moulding are fun especially if you see the internal and external miters and want all the segments the same size. Always start fitting with a full segment on the external mitres and hope the external mitre works out ok Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
On Tue, 29 Oct 2024 at 14:34, imranindiana via <imranindiana= [email protected]> wrote: I know how to achieve everything but the shallow groove between notches. Any ideas?
|
