Re: Help Ripping - just got my first sliding table saw. Felder k700s
|
I use the same method as Imran. John love you Gizmo! thanks for sharing.
Hullo all- very informative thread, thanks to all the contributors! I learn a lot here.
I recall one member posting that they precisely cut a square of MDF, set it against the left fence, and now you have a registration surface for ripping narrower pieces. (Can clamp the mdf to the outrigger so it doesn’t shift). I made one of 3/4”, 500mm square, so I can use the flip stop to set rip width by adding 500. Works really well and as long as the two ‘good’ sides touch nothing else, has stayed true for a lot of use. Costs nothing :-)
Cheers
--
Daniel Day
Kitchener, Ontario, Canada
-- Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
|
