Re: Shaper Spindle Question
|
Albert interesting I was curious does the machine also calibrate the sliding table to run parallel with the cutters on the spindle? Designing and building for 50 years
toggle quoted message
Show quoted text
On Oct 8, 2024, at 12:44?AM, Albert Lee via groups.io <timbershelf@...> wrote:
? I like reading comments on questions like this, so I can learn a thing or two....
?
Fortunately with my spindle moulder TI145EP there is auto calibrate function to a built in "true perpendicular" and relative fence positions.?
?
I discovered this function while investigating why the tenon plate is cutting trapzoid rather than square - turn out the spindle was out by 0.9 deg.?
?
by pressing auto calibrate the spindle will perform series of movement and then tells you certain parameter is out.?
?
If the true perpendicular is out of whack it can be adjusted manually.?
|
