About two weeks ago, I went to turn on my Kappa 590 saw and it wouldn't boot up.? Unfortunately, the SD Card that holds the operating system and tool data etc. failed.? The fix required the local agent attending and with a new SD Card he installed the OS from a USB stick.? (A backup was made at the time the machine was installed but this wasn't available as the tech needed to recalibrate the machine)
Sadly, there is no facility on the machine to backup the system so it can be restored in the event of failure.? So thuis doesn't bite me on the backside again, my intention is to remove the SD Card and on Linux using a disk imaging utility attempt to create an image and copy it to another SD Card and see if that works, but before doing so, thought I might ask if anybody else has attempted / succeeded doing this.??
?
Another issue I have is re-entering the saw blade data.? I have a vague recollection of just entering the Felder part number of each blade and all the fields auto filled, but I haven't been able to achieve this since.? Having a quick read through the Felder manuals hasn't yielded what I'm after either.? Is anyone able to comment on how they add blades, please?
?
Cheers
David
