The easiest and cheapest way to run compressor around your shop is with rubber or hybrid air hose quarter 3/8 half 3/4 with Barb fittings. There is a vast array of fittings.
Straight elbow, reduce increase T ?I use the cinch tool from McMaster pinch off..
Air hose typically as a 300 psi burst.
I¡¯ve had this system set up in my Mill shop and machine shop for 20+ years.
At home in my assembly lab, I use PEX.
You can mont with pex brackets zip ties and so on.
Never had any leaking problems.
Mac ,,
Designing and building for 50 years
toggle quoted message
Show quoted text
On Aug 24, 2024, at 10:55?AM, Wade Dees via groups.io <wjdsignature@...> wrote:
?
Hi Taylor,
Are these designed with a push-in connection for the elbow and tee fittings? ?Can they be taken back easily too? ?Thx. For sharing.
Wade.?
On Aug 24, 2024, at 8:46 AM, taylor donsker <tdonsker@...> wrote:
?
I bought these kits on amazon for my new shop and have been very happy. cheap fast and leak free. I use aquarium grade silicone on every threaded connection and zero leaks. Never going back to tape.?
https://a.co/d/3Mm21i2
