Aaron, I do use sheet goods regularly, so that's where my concern is. When I had my cabinet saw and I needed to make a plywood cut that had to be perfect, I'd run a shallow cut backwards first, then make the cut. That's a workaround here also, but that means two passes for each cut and that doesn't excite me.
I forgot to mention also that the Minimax is dado-capable, and I dado regularly. On the Felder, I can likely use the router spindle and shaper fence to make those dados, but that might not be an efficient workaround... never tried it.
@Brian, don't recuse yourself from the conversation just because your machine is a contender! :) Your input is valuable here, especially since you've had the hands-on experience with the Felder here.
Zayd
