Where was the 30mm arbor size ordered from? I¡¯m seeing $309US for the 30mm arbor size set but I¡¯ve only looked at one web site.
toggle quoted message
Show quoted text
On Feb 5, 2024, at 9:10?AM, James Zhu <james.zhu2@...> wrote:
?
At $120, the new CMT dado stack is unbeatable. I do not know why anyone wants to buy the dado Stack from any other company.
Btw, the review from Taylor Tools is very good. I have to say the product review from Taylor Tools is trustworthy based on ,my experience.
James
On Mon, Feb 5, 2024 at 9:55?AM john adank <
lseap107@...> wrote:
Infinity Tools has a somewhat similar design with their stacked dado set.? You can get an entire 3/4¡± stacked dado set on your arbor.? Unfortunately, no 30mm sized arbor and you would still have to drill pin holes and it¡¯s $329.90 and out of stock.? It has 2 full 1/4¡± chippers. I have the new CMT set which I set up on my Sawstop.? The 3/8¡± deep rabbit cuts I made were flat and little to no tear out but I had quite a bit of burning in the solid maple.? Mya e the burning was from my feed rate and the fact that¡¯s it¡¯s maple. Not sure if Infinity Tools could drill out a 30mm arbor hole and pins or not. I would definitely like to get one of these two dado stacks for the Felder.
John Adank
