Also possible is using table saw blades and/or dado stack bored to spindle diameter and stacking/spacing as necessary. Helpful if you already have them and forgot to think sideways.
Cornelius, I have Felder adjustable groover you posted a link to, it makes great tenons in one pas as long as the shoulders aren¡¯t higher than ?about 7mm (single cutter thickness).
Obviously it makes good grooves.
Do you have a 30mm spindle?
If not you can have the cutter bored to 1 1/4¡± or buy the metric spindle, that¡¯s what I did as I had some legacy Imperial cutters, added a 1 1/4¡± spindle to the shop.
Regards, Rod
-- Brett Wissel
Saint Louis Restoration
1831 S Kingshighway Blvd (at Shaw Blvd)
St Louis, MO 63110
314.772.2167
brett@...
