Re: AD941 Alignment Procedure
|
David,
For full disclosure, I told Mike who I learned from ?.
toggle quoted message
Show quoted text
On Jul 1, 2023, at 6:46 PM, David P. Best <dbestworkshop@...> wrote: ? Mike, good write-up. ?The table alignment sequence is visually covered in the following pictorial sequence. ?Each photo has a description. ?This is a Dual 51, but the process is identical for the AD941. ? I also have it in a Survival Guide form with more detailed instructions.
David Best
DBestWorkshop@...
https://www.flickr.com/photos/davidpbest/collections/
https://www.youtube.com/@David_Best
On Jul 1, 2023, at 3:06 PM, Mike <mike@...> wrote:
Thanks to Imran for getting me oriented on the alignment procedure. Remembering how hard it was to install the plastic end on the euro blade guard, I was hesitant to remove the shroud that ties the two tables together, because the blade guard needs removed. I learned that it's not practical to align the machine without removing the shroud, so I modified one of the plastic ends to slide out. It just requires removing the top lip.
I attach the procedure that worked for me and hope it's accurate enough to be useful for someone else.? I'd imagine there are other variables and I was lucky, but this procedure produced flat boards in under two hours.?
<Felder AD941 Table Alignment Procedure.docx>
|
imran