On Jun 28, 2023, at 12:14 PM, imranindiana <imranindiana@...> wrote:
?Wade,I use 5¡± spiral with Felder adapter and I assume Bill Belanger adapter does the same. Which ever way you go, just confirm that the hose end matches your requirement.Imran Malik
On Jun 28, 2023, at 3:04 PM, Wade Dees <wjdsignature@...> wrote:?Imran,Great point about clearing the hose out of the path of outfeed. ?I¡¯d like to go with the right angle adapter setup, but I¡¯m also wanting to keep my hose size to the 4¡±+ that it is. ???WadeOn Jun 28, 2023, at 11:07 AM, imranindiana <imranindiana@...> wrote:?¡°?Some have mentioned they use Felder¡¯s right angle adapter, but I don¡¯t see the need on my situation to use a right angle adapter.¡±Above may be true for you but just want to be sure that you have gone thru the mechanics. The right angle adapter works great for me both in jointer and planer modes. It routes the hose just as I would like. Even though mine is dual 51 concept is same. I use 2 separate hoses (thanks to David Best) for jointer and planer and both are standard 5¡± spiral hoses.The pics illustrate the benefit to me for the right angle connector.?Jointer:<image0.jpeg>Planer: This is important because you want the hose to go up, otherwise it will be in the path of outfeed.<image1.jpeg>Imran Malik
On Jun 28, 2023, at 11:48 AM, Wade Dees <wjdsignature@...> wrote:?Hi Bob Wise,I¡¯m just connecting flex ducting that has the reinforced spiral wire that coils through it. Wanting to make a direct attachment. ?Some have mentioned they use Felder¡¯s right angle adapter, but I don¡¯t see the need on my situation to use a right angle adapter. ?Just a straight tapered adapter would suffice. ?Thx,WadeOn Jun 28, 2023, at 8:36 AM, Bob Wise <bob@...> wrote:?What material are you using?On Wed, Jun 28, 2023 at 8:35?AM Chris Reyerson <reyerson@...> wrote:I use my 3D printer to grow a adapter between the machine port and the hose I use.? A 3D printer has all kinds of uses in a wood shop for things like this.
Chris?