You previously posted a photo of what you suggest is a 2200mm long sliding table.?

And if you look closely at the photo you supplied, the tape measure clearly shows the table length as 2500mm. ?See below.

A 2200mm siding table does not exist. ?X-Roll sliding tables are available in the following lengths on K500 and up saws: ?1300, 1550, 2050, 2500, 2800. 3200, and 3700mm. ?

Also, travel of the sliding table can be restricted by the telescoping arm that supports the outrigger table - if the outrigger is installed on the machine. ?That travel restriction is a function the length of the machine chassis in addition to the width of the outrigger table. ?Outrigger table sizes are typically matched to the length of the sliding table, but defaults can be overridden during ordering. ?Outrigger tables are available in 1100, 1300, and 1500mm widths. ?

A 2500mm sliding table is available on both the smaller and larger (“S”) chassis models. ?When the smaller chassis K700 is ordered with a 2500mm sliding table, the standard outrigger the 1100mm version, and it is my understanding that this combination will restrict table travel such that it can NOT cut a full 96” length when the outrigger is installed. ?To achieve a 96” travel, the 1300mm outrigger table must be specified.

Similarly, a 3200mm sliding table on the “S” chassis requires the machine have a 1500mm outrigger table to attain unrestricted travel.