Thanks David. I have asked if it is possible to add the registration feature of the current 1100 outrigger to the older model. Let’s see what I hear back.
Imran Malik
toggle quoted message
Show quoted text
On Jun 1, 2022, at 7:50 AM, david@... via groups.io <david@...> wrote:
?
That is the older style 1100 outrigger table. ?It does not have the newer 90-degree registration stops you can see on the newer version in the photo below. It might be possible to order those adjustable stops from Felder as a spare part and adapt them to the existing outrigger table. ?Still, the pivot point setup on that outrigger table is very sloppy and getting repeatability of the fence alignment has always proven to be problematic. ?
David Best
https://www.instagram.com/davidpbest/
David,
Here is one the Brad shared with me.
?
Would you please post a photo of your outrigger table that shows the entire table and crosscut fence. ?I can tell from your photos that your machine has an X-Roll sliding table, but the components that are related to the crosscut fence and how the outrigger table sits on the sliding table appear to be the smaller 1100 outrigger table. ?That outrigger is considerably different than the larger 1300 and 1500 outrigger tables supplied with longer sliding tables. ?Current versions of the 1100 outrigger table look like the following photo - and you can see the 90-degree registration stops on each side at the end of the outrigger table.
On Jun 1, 2022, at 3:46 AM, celestialgazer2001 <
bradpj53@...> wrote:
I've been privately troubleshooting with the help of Imran on setting up my "new" 2004 KF700. There seems to be no provision for a squaring fine adjustment for the X-cut fence; the angle indexing rail has a locking hex nut at each end and the corresponding block has a simple sliding block. The saw end block threads into a hole (front or back) on the outrigger table itself. Is something missing or is this model just this crude?
<IMG_3775.JPG><IMG_3776.JPG>
imran