My first reaction was that?it was steam, check the moisture content of the wood.
Btw, I have that Aigner resaw pressure module, I have the one-wheel and two-wheel accessory. I use a two-wheel accessory when resawing, it works great. The only shortcoming is it is not spring loaded.
On Wed, Feb 16, 2022 at 10:37 PM imranindiana <imranindiana@...> wrote:
Thanks Joe and Jarred. I should have added there were no knots and I am using carbide resaw king. No burn marks on the wood either. No problem resawing, you can tell from my feed rate; so not a dull blade.?I was wondering if it was steam.?
Imran
On Feb 16, 2022, at 10:11 PM, Joe Jensen <joe@...> wrote:
?Seems if there is burning after hitting knots then it¡¯s likely the blade is dull.?
On Feb 16, 2022, at 8:09 PM, Jared Leach <leach.jared@...> wrote:
?
I don't know what the cause is, but I've experienced the same thing on both WRC and most recently Tennessee Aromatic Cedar. I believe it had something to do with hitting the knots, but I was certain I was going to get a burning ember into my dust collector and be quite sad. I don't see any apparent knots on the boards you're sawing though, so that may not be?the case.
On Wed, Feb 16, 2022 at 6:55 PM imranindiana <imranindiana@...> wrote:
Sorry about the video resolution. I don¡¯t recall this happening with iphone 7 but iphone 13 does this resolution reduction w/o asking. Anyhow, can still see the smoke just not as clearly as in full resolution.
Imran
On Feb 16, 2022, at 9:40 PM, Imran Malik <imranindiana@...> wrote:
?I did some resawing today. Splitting 2x8 WRC. On some boards, I saw smoke coming out at the beginning of the cut but the blade was cold to touch after I finished. Does anyone know what is happening?
