Not that I¡¯ve done it100 times put slider on saw horse and slide the machine in to it with pallet Jack. On person operation.
Mac,,,
Designing and building for 50 years
toggle quoted message
Show quoted text
On Feb 15, 2022, at 9:31 AM, David Davies <myfinishingtouch@...> wrote:
?
If you do it yourself, get a Harbor Freight lift cart
Dave Davies
I was able to do it myself on the k940, use 2 saw horses leveled to where it could be slid on.?
The k700 was done with one tech and me guiding it per his command.
On Feb 15, 2022, at 10:05 AM, Mark Foster <mfsta2lt@...> wrote:
?I did it with 2 helpers, both as clueless as me. ?
?How difficult is installation of the sliding table on a K700S?
I will have Felder commission my new saw, which will have the 3200 mm table. The salesperson says this includes installing the sliding table. The user manual, however, recommends getting two or three helpers to assist with installation of the sliding table. That seems like a disconnect, since it is unlikely that Felder will send three guys to set up my saw.
I¡¯m just curious what other people have experienced.
Thanks!
--
John Hinman
Boise ID
Not a Felder Owner yet - expecting K700S in February and A941 in April 2022
--
Mark Foster
--
Dave & Marie Davies
318-219-7868
