Okay, I¡¯m starting to take my rip fence support rail off and starting over with the installation. ?Many have pointed out that I had the large washers on the cast table connection on the front when they clearly need to be in the back, but took the nuts off on the back side of the cast table and I have these other two large washers as well. ?Do I double up the washers on the back side nut? ?Pictures attached.?
Thx,
Wade
toggle quoted message
Show quoted text
On Feb 11, 2022, at 8:10 AM, Brian Lamb <blamb11@...> wrote:
?
My older machine has a plastic pad with a large radius on the bottom rather than a wheel. Wonder if they could mount two rollers in tandem so that why one is over the table joint the other supports. You would never have the thump-thump.
Hi Jay,
Yeah it¡¯s really bad when I slide it across. ?Very disappointing for what these things cost. ?I keep looking at the construction of the underside with the support wheel and I don¡¯t see how this could be fixed. Even after I completely reinstall my support bar today and adjust my toe out. ?I¡¯ll ask Felder Tech about it as well. ?
Thx,
Wade
?Repositioning the rip fence is my only disappointment with the K700S. In my case I hear one thud with movement when I transition between the cast top and steel support which are co-planer but the top has a rolled edge which creates a slight gap the wheel rides over. In your video I hear the same thud 5x you definitely should be able to get rid of that.
Jay
Cleveland
