Bill, I can¡¯t answer that as I don¡¯t have that version of machine either. I can tell you that the spud that goes into the fence extrusion should measure 1.445¡± x 1.085¡± ?to fit perfectly into the piece of extrusion I have here.
toggle quoted message
Show quoted text
On Jan 11, 2022, at 8:30 AM, Bill Belanger <
Bill@...> wrote:
What should the final dimension be Erwin? I don¡¯t have a saw to test it on. Should the step be the same length as the DRO model Brian?
Thanks?
Bill Belanger
Yes I printed mine and found it was about one half inch tooo short of the blade.?? I will half to glue on and addition.??
Elwin
?
Sent from for Windows
?
?
You all might want to measure from the end of the fence extrusion to the blade first, seems some folks are saying their unit is not 1 5/8¡±, so that might have to vary.
?
?
Bill: ?Add me in for a couple; I will pass on the fingers addition and am not picky on the color as long as it is a ¡°perfect¡± Felder green (just joshing on the color).? Terry
On Jan 10, 2022, at 4:26 PM, Brian Lamb <blamb11@...> wrote:
?
I printed in PLA as it¡¯s what I have and I don¡¯t see it being an issue. You could do PETG, Nylon and carbon fiber filled, but I don¡¯t see any advantage to any of those. I have a LED light mount I printed for my CNC mill about 3 or 4 years ago, it¡¯s still working despite being sprayed with coolant and covered in chips all the time, just used PLA on it as well.
?
?
What plastic type do you recommend printing it in?
?
?
?
