Re: AD 741
¿ªÔÆÌåÓýShawn, Thanks for sharing that calibration also works in inches. I obviously do not know exactly how the SW works, but with what you shared should one not caliper the material to 0.785¡±, if using inches? Seems like it would be more accurate because 20mm = 0.787¡± and 0.785¡± = 19.9mm. I know many here likely don¡¯t care about getting down to that level of accuracy for wood. Imran On Jun 9, 2021, at 12:37 PM, Shawn Kammerer via groups.io <shawnkammerer@...> wrote:
?
Imran¡¯s advice worked perfect for my 941. But if you¡¯re in inches and don¡¯t want to switch to mm, you can do the same process and just mill a board to 20mm, checking with calipers, then hold the reset button, and it¡¯ll reset the number to .785. -Shawn
On Wednesday, June 9, 2021, 9:17 AM, imranindiana via groups.io <imranindiana@...> wrote:
|
imran