Re: HP needed for heavy cutter?
|
Mike,
toggle quoted message
Show quoted text
I sold my 718 couple of yrs ago for around $2400. So anyone selling likely will go to craigslist first. That is what I did. If slot depth is important than milling from bottom will be optimal. Milling from top will rely on tie height to give you same depth on all. So maybe woodmaster or like will not work for you. Unless you are interested in routers, any moulder should work similar to woodmaster. I know there is at least one knock off of woodmaster. I have never milled plastic so if you go moulder route, I would certainly call the company to verify the project. Imran On Jan 29, 2021, at 3:06 PM, TMichael WARD via groups.io <tmikko@...> wrote:
?Hi Imram. I checked ebay and didn¡¯t see any Woodmasters. Any ideas where I should look? I¡¯m in California. Slot depth is fairly important, tie height is not. We build track panels 10 feet in length, take them to the road bed; pour washed gravel over them, then pull up to final height, so height variability is not a problem. |
imran