Nice write up Lucky, now you have me thinking I should have sprung for the xmotion on the k940?.... For what it¡¯s worth the k940 I received with a build date of Nov 2020 does have a 5¡± internal dust hose well as the saw port casting being 5¡±, i believe the saw aggregate is the same in the kappa 400 so the must have changed it recently.?
toggle quoted message
Show quoted text
On Jan 3, 2021, at 5:56 PM, David Luckensmeyer <dhluckens@...> wrote:
?
Pat:
Great. I think you¡¯ll love the saw. And a huge yes to getting an epoxy floor put in BEFORE the Kappa arrives. I¡¯ve done my epoxy floor in parts, moving all the machinery into 1 third of the shop, and then moving it around so I could get at the entire floor. It was soooo painful, but I love the result.
Lucky
Thank you Lucky for the detailed response. In considering upgrading from my K500P, I had previously said I was going with the K700S, but changed my order to the Kappa 400 X-Motion. Now for a estimated 20 week wait for delivery, but that will give me plenty of time to get a phase converter wired into my shop (currently leaning towards the Phase Perfect PT010). Also I am seriously considering hiring someone to put on a nice epoxy floor coating after grinding down the old finish and leveling out the high spots.?
Pat Rice
