Re: Home-brew table extension rails for off-brand machines
|
Tom,
toggle quoted message
Show quoted text
the depth of lip on two of my ext tables measure 6.5mm. so if you can provide 7mm clearance then the tables should mount BUT i am curious why felder built it with more clearance on one side. perhaps it is to give more options but it could be for an accessory that requires more depth. maybe someone can chime in. imran On Dec 5, 2020, at 3:25 PM, imranindiana via groups.io <imranindiana@...> wrote:
?Tom, ¡° I'm still curious about the "standard" offset from the table surface to the top of the bar on Felder machines where the F-rail is integrated/milled into the table¡± i was not clear but in my last response, the 11mm i mentioned is the distance on the cast/machined F couplings on KF700 and dual51 planet cast iron tables - as made by felder. Imran On Dec 5, 2020, at 3:10 PM, tom@... wrote: I'm still curious about the "standard" offset from the table surface to the top of the bar on Felder machines where the F-rail is integrated/milled into the table |
imran
