Thanks Joe, Imran, and Chris, ?this is all great information.?
Chris, that diagram is exactly what I was looking for. For reference, the band saw I'm currently using is a Laguna LT14 SUV, and has a table ~35mm in thickness. Going by the document you've scanned, it looks like the Aigner bars would?
just work, I would just want to be careful that I'm only using table extensions with the leg support.?
For reference, it looks like the Felder bars have the fastener centered 25mm below the top of the bar, which in turn should be ~11mm (10-12mm) below the table surface, so I'm inferring that the holes should be centered ~36mm below the table surface.
?
Imran, you mentioned setting the bar 10-12mm below the table surface. Based on the Felder aluminum extension table, I was planning on setting the bar 11mm below table surface. That being said, yes in a perfect world I'd want all of the bars to match, do you know what the drop is on the Felder machines where the bar is integral/milled into the table surface? I have a KF700SP on order that I could measure, but it won't arrive until January and I'd like to get these bars installed before then.?
--
Tom Gensmer
Heritage Home Renewals, LLC
Minneapolis, MN
Tom Gensmer