Put the selector button in reverse for the shaper, see if the yellow light comes on. If it doesn¡¯t, you have an open connection in your e-stop string. All the limit switches and stop buttons are daisy chained into one circuit, if any of them are open, you can¡¯t start the machine.
toggle quoted message
Show quoted text
Felder Folks,
I used my the Shaper this morning, then switched to saw and it is not starting. I¡¯ve tried:
- Power cycling
- Fuses checked with ohm meter
- Safety switches properly engaged
- Switching from saw to shaper several times
Neither the saw nor shaper will start.?
Any guidance is appreciated.?
Toby
Get
