Re: Cutting mitered bridal joint
|
Well done Brian! How did you account for movement of the top in your attachment?
Marlowe?
On Fri, Oct 9, 2020, 7:45 AM Brian Lamb < blamb11@...> wrote: A tall cutter would have worked on smaller parts, but that table was over 6¡¯ long and I might have been able to do the two long edges, would have hit the ceiling trying to do the narrow ones. I¡¯m sure a talented person could have done it with a hand plane¡ but that¡¯s not me...
On Oct 8, 2020, at 8:43 PM, Mark Foster < mfsta2lt@...> wrote:
Brian,
This is the major reason I bought the KF with a 9¡¯ slider. I could just see doing something like this! I really like my 4¡± tall spiral cutter with bearing for profiling larger parts.
Mark Foster On Oct 8, 2020, at 8:01 PM, Brian Lamb < blamb11@...> wrote:
The bevel was a real butt pucker set up¡. This picture is kind of dark, but you can see the shaper with the blade on it. I raised the actual table up with two layers of 3/4¡± ply to get it tall enough to cut as thin as I wanted, but not have the other end of the blade hit the table.?On Oct 8, 2020, at 7:05 PM, Mark Foster < mfsta2lt@...> wrote:
Brian,
Thank you for posting. I really like the Maple and Bubinga contrast. The taper on the underside of the table top is elegant.
Marl Foster On Oct 8, 2020, at 6:35 PM, Brian Lamb < blamb11@...> wrote:
Thank you! Like your table too, definitely a different look with the tenon on the lower section.On Oct 8, 2020, at 3:30 PM, mark thomas < murkyd@...> wrote:
Brian,?
Nice table, I like the 3-sided tapered legs and different wood feet.? Loosely reminds me of this walnut taper leg and koa foot I once did, which also has an odd mortise and tenon on diagonal.? ?
Michael, the stool is very nice, the joint seems perfect for it.? Is the one in photo tapered however?? ?How will you attach the slats?
<IMG_0695.jpeg>
|
