Re: Aigner Distometer up alternative?
|
A few more photos to illustrate the fence setting technique.
Joe in New Orleans
toggle quoted message
Show quoted text
On Jul 28, 2020, at 9:32 PM, bacchus6015 via < joeinno@...> wrote:
Before I bought the Profile with x-motion I used a height gage and two Digital indicators to set up the shaper fence and make adjustments.
The height gage is easy to understand. I tried a 6¡± Starret and was no better than the Igaging height gage. ?Both of this heigh gages had fluttery readouts making a confident reading difficult. ?The height gage in the photo uses a mitutoyo read out that is nice and steady.
I use the one of indicator mounted on a 123 block to measure the depth of cut in a test piece and the second indicator mounted on a magnetic stand to make a relative adjustment of the fence depth by indicating to the rear of the hood and measuring the movement forward or back.
Joe in New Orleans
<IMG_3674.jpeg><IMG_3675.jpeg><IMG_3676.jpeg><IMG_3677.jpeg>?Jul 28, 2020, at 9:04 PM, Airtight: Clamps by Air Compression < airtightclamps@...> wrote:
?Designing and building for 50 years On Jul 28, 2020, at 6:26 PM, Bill B¨¦langer <Bllblngr@...> wrote:
? I vote to blame it on Mac too. LOL
Bill Belanger? On Tue, Jul 28, 2020 at 7:25 PM Brian Lamb < blamb11@...> wrote: Well, it¡¯s Mac¡¯s fault then¡.
If I did that, then I would think the first post of this new thread would me mine.? Mac's is the first post of this thread version.? Maybe Mac thought this was such an important topic that it deserved 2 threads! :)
|
