On Jul 28, 2020, at 9:12 AM, David Davies <myfinishingtouch@...> wrote:

Am I the only one with the Betterley Una-Guage.? Works like a champ and can be used for many different functions.

Dave Davies

On Tue, Jul 28, 2020 at 9:10 AM Chris Perren <cperren@...> wrote:

Hebor H-50 appears to be an interesting tool although not cheap.? I’m assuming its German. ????

?

Regards,

?

Chris Perren

512-415-6951

?

From: [email protected] <[email protected]> On Behalf Of Airtight: Clamps by Air Compression
Sent: Tuesday, July 28, 2020 7:58 AM
To: [email protected]
Subject: Re: [FOG] Aigner Distometer up alternative?

?

Joel,

I been using one sense 89, really the old man on the block.

Go to for analog set up.

Mac,,,

?

??

?

martin/campshure/co/llc
mac campshure?
7412 elmwood ave.?
middleton, wi 53562-3106
608-332-2330?cell

airtightclamps@...

?

Designing and building for 50 years

On Jul 28, 2020, at 6:31 AM, habacomike via <habacomike@...> wrote:

?It’s roughly $500. ?

?

On Jul 27, 2020, at 9:31 PM, joelgelman via <joelgelman@...> wrote:

?

I spent some time today fussing with fine adjustments on the shaper to get the cut just right with too many test cuts.? I the remembered the Aigner Distometer.? Did a search.? Saw a comment that Joe Calhoon was not so fond of it.? Saw a comment that the Distometer was discontinued.? Saw a comment from some time ago by David Best that there was a new kid on the block, the Hebor H-50.? I saw a Youtube video posted on it not too long ago



For those with shapers wanting to get the tooling height and depth of cut just right as fast as possible (other than presets), any recommendations?? Not sure if this Hebor H-50 is the best option or the cost. ?

?

--

Dave & Marie Davies

318-219-7868