Glen is correct. I had the same setup on my K975 and my KF700. ?Some machines come standard with the ability to mount the support arm at the 31-inch
or 49-inch clearance position irrespective of the rip fence capacity. ?Other machines, like my Kappa 400 xMotion, have to be ordered with 31¡± rip and 49¡± overhead guard position if that¡¯s what you want. ?It all depends on how the support bracket is designed and how it attaches to the machine, which is machine specific.?
David Best - via mobile phone?
toggle quoted message
Show quoted text
On Feb 24, 2020, at 6:51 PM, Glen Christensen <grchris1966@...> wrote:
?
I do believe if I remember correctly that David Best has a 31" saw but got the 50" OH guard. But that was on a kappa.
Glen
Big Tree Woodworking
P.O. Box 257
Avery Ca 95224
So Felder did tell me that guard ?could be positioned for either without modification however I just checked and it would need to be cut down a little and a hole or two drilled then it could be used for either the 31 or 49?
Regards, Mark
?
Mark,
Looking at the K740 overhead dust collection on Felder USA website, I doubt the rip capacity is adjustable between?31 and 49.
??
James
I haven¡¯t checked but I asked if I ordered the 49¡± and found that I didn¡¯t have enough space and wanted to change to the 31¡± i was told that the guard fits either
Regards, Mark
> On Feb 24, 2020, at 6:24 PM, Sang Luu <sangluu@...> wrote:
David P. Best