¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Messages
Single Messages Topics Expanded Polls

Re: Euro Guard on K700 #sawsetup

 

¿ªÔÆÌåÓý

Overhead saw guard?
It really annoys when overhead saw guard moves so many years back I replaced the ?funky SCMI with my own design. I used the Felder saw hood and inside of the telescopic arm. This slides in and out on humw slide pads with one lever so it can move laterally as my saw moves laterally 6¡± . It also slides quickly out of the way for access and out of way for shaper fence. I can also quickly pull the whole arm out. ?The saw guard hood has 4 quick release bolts to take off and put back on.
The rest of the affair is based of a 6¡± tube steel post of set for cross cuts. The whole thing bolts together in a few sub assemblies. Pretty much all made from scrap bin.
View from behind saw.

Mac,,,
?

martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330?cell

Designing and building for 47 years


On Feb 19, 2020, at 7:50 PM, Alex Bowlds <aabj@...> wrote:

?I will try to remember to post some photos of the older design tomorrow. ?I had taken photos showing the droop and sent them to Felder some time ago. ?I just no longer have them on my iPad.

A.
On Feb 19, 2020, at 11:10 AM, Mark Kessler <mkessler10@...> wrote:

?Right, will double check tonight but mine definitely does not for at least 5-8¡± of swing. I can set the bottom of the clear polycarbonate to a hair above the top of the blade and can swing it past the blade without the guard touching the blade for example

Regards, Mark

On Feb 19, 2020, at 1:53 PM, Sang Luu <sangluu@...> wrote:

?Alex noted that the drooping occurs when the arm is swung (I assume 90 degrees) out of the way.







Join [email protected] to automatically receive all group messages.