you ?need to make sure T 3 generated leg is not Hook to control circuit the gray lead I think
?You also ?want to make sure the AR is I think X series or voltage sensitive
Designing and building for 47 years
toggle quoted message
Show quoted text
On Feb 17, 2020, at 9:07 PM, Michael Glaser <1michaelglaser1@...> wrote:
?Well...
Electrician came, installed phase converter. It is an American Rotary PL- 20 which will be connected to the 940 S.
Voltage read 243,248,249.?
The saw is still on the crate, I literally just unloaded it and didn't have time to off load the machine yet. All the "goodies" around the main saw are off - only the saw remains.
We plugged it into the saw, just to make sure the panel lit up and the machine was getting "power".
It lit up and was getting power... and, I just couldn't resist touching the power drive for height. I turned the height up until the riving knife was exposed. Then... the panel went blank.?
Machine won't turn on.
So, I read through some of the manual and i know there is a motor switch on the back by the main (black nub inside clear dome)
But, I did not want to touch anything... First order of business.. I guess is to unload it fully off the crate :D
