Re: K500 blade height adjustment with Felder Dial indicator for system handwheels
¿ªÔÆÌåÓýI have a height gage but would like to have the hand wheel version height indicator so that I could make changes on the fly similar to setting stops on a fence.? Fast.? The down side is that it has to be re-stet ?to each blade diameter so not convenient to my 200mm ?dado and 315mm combo (or mental math can be calculated at a certain risk). ?And then there is the worm gear backlash to deal with.? A much better set up would be a dro mounted on the trunion as in the Power Drive version.? The one I have on the shaper spindle is very handy.? It can be re-zero'ed at any position.? I also use the one on the planer but it is not as accurate so confirm final thickness with a caliper. ? And then there is the problem with my calipers coming out of tune because I dropped them too many times.? And then there is my bi-focals.? I would love to have a big red read out and zero button. ? Jon S ? From: [email protected] [mailto:[email protected]] On Behalf Of David
Sent: Saturday, February 15, 2020 7:52 AM To: Bill James; [email protected] Subject: Re: [FOG] K500 blade height adjustment with Felder Dial indicator for system handwheels ? Curious as why you would need/want to have this? I use a height gauge for setting dado blade height its quick and easy. Well maybe not quite as fast as built in gauge. ?
? |
Jonathan Smith