David,? according to the tracking info, it should be at home when I get there after work.? I agree with your thoughts about the head shape being to locate the cam.? I will post an update.
The store was West Coast Classic Cougar, if anyone needs a new bookmark for car parts that may interchange.
On Monday, November 30, 2020, 10:31:44 PM EST, D. Hadley via groups.io <dhadley390@...> wrote:
Thanks for the update.
The cancel cam as far as I know is the same between the cars/trucks of that vintage so it would stand to reason the hardware would/could be the same. That thread looks to be sheet metal type & that funky shoulder on the screw head I am thinking is to center in the cam mounting holes.
When do you expect to have them?
Please keep us updated.
David from WNY
On Sunday, November 29, 2020, 09:39:48 PM EST, Bob Duncan via groups.io <breathe_ezr@...> wrote:
I checked using drill bits and the hole was between .141" and .156",which puts it at a #8 or #10.? I have an absolute ton of #8-32 screws, and I think the size is right.? but the thread pitch is off.
I did find this which is an odd thread.? So, for the $10 bucks for the 3 I'll just buy them.? I'm sure Cougar and Fairlane are close enough.
