It is the same part for 68 and 69. In both cases, it is just the
rubber and there is left and right. It slots into a metal channel on
the back edge of the front window. You do NOT remove the channel.
You need to slide your old rubber out before you can put in the new
stuff. There is a screw holding the bottom of the rubber. The rubber
then slides down out of the channel (into the door).
I don't know whether or not you need to remove the front door glass
to get at everything. Someone else can chime in on that.
At 02:37 PM 3/14/2024, Gary Wittman via groups.io wrote:
>Marti,
>
>I found the part on your website.? It shows it fit both 68 and
>69.? Does that vertical strip fit either one?? I thought the 68
>attached to the rear side glass and the 69 attached to the front
>side glass.? I am surprised it fits either one.
>
>Also, I don't see on your website how to order and make payment.? Do
>I just call and place an order?
>
>
>Gary in SoCal
>
>On Thursday, March 14, 2024 at 01:19:02 PM PDT, Gary Wittman
><
gary.wittman@...> wrote:
>
>
>Thanks for the suggestion Linc.
>
>Marti, that is exactly what I need.? I will be looking at your site.
>
>
>Gary in SoCal
>
>On Thursday, March 14, 2024 at 11:15:35 AM PDT, Marty Burke via
>groups.io <mburke6662@...> wrote:
>
>
>Vertical glass strip
>I have them in stock $40/pr
>Plus shipping
>Thanks
>Marty
>
>
><>Sent
>from the all new AOL app for iOS
>
>On Thursday, March 14, 2024, 11:51 AM, Gary Wittman via groups.io
><gary.wittman@...> wrote:
>I need to replace the quarter window rubber molding for my 69
>Sportroof Cobra.? It fits on the driver side window and seals
>between the front and rear window side windows. I have searched some
>online and can't seem to find what I need.? It may be the
>nomenclature I am using.? I may also have to buy a more moldings
>that what I need, but I don't want to order a kit and find it is
>missing the molding I need.? I don't mind having to buy all the
>moldings/seals but only need the ones that are located between the
>front and back side windows.
>
>Any help in providing a part number or correct nomenclature as well
>as a good company for this part would be greatly appreciated.
>
>Gary in SoCal
>
>
-----------------------------------------------------------------------
Chris Scheers, Applied Synergy, Inc.
Voice: 817-237-3360? ? ? ? ? ? Internet:
chris@...
Marty Burke