Thanks Frank, and thanks for the photo.? Is the mill column bracket
just attached to the bed with 4 bolts?? Are there any bed twisting issues
with this type of mount?
?
So the brackets for the V10 and the V13 must be different though, I can't
imagine that the larger machines uses the same bed (?)
?
I'm not sure that this is something I want to pursue, but then again, if I
happen to come across a tool with the right price and the right voltage motor,
who knows ;-)
* REPLY SEPARATOR
*
toggle quoted message
Show quoted text
On 4/4/2006 at 4:16 PM Frank Hasieber wrote:
Rich,
the head and column are identical for the FB2 mill, the V10 and the V13; I
cannot imagine that Emco would have separate and different brackets for the 3
different machines, not good economic sense. If you have seen the photo of the
mount on the FB2 that I sent, it is a substantial casting. Looking at the V10
manual it looks the same.
Frank
?
--
Regards,
Rich
================================
Richard Kleinhenz
================================
