On 4/16/2006 at 12:46 PM almus_kenter wrote:
270 new. I got it from dealerselectric.com (or something like that)
I have not purchased a resistor yet. But I plan to.
Right now the lathe coasts to a stop.
What was the price from amarillo?
It's a little less like $240 or so
Yes. I do not have the safety version of the S11 and
still it was a bit of a fit.
I think the price was reasonable...but it came right on
the heels of my buying the lathe so it was a bit painful.
I know - that's where I'm at... all these items that are not unreasonable by themselves DO add up! At least I have a VFD that was reasonable to get me started, that resistor just threw me, and it seems that I have a way out eventually - replace the VFD. I'd probably still leave it external - on the wall is quite OK where I have the lathe. That way I can also use the touch pad if I want to change something - rear access to the electr. box on the lathe is a little limited. I have it close to a wall, enough space to get in there and open the door, but not a lot of wiggle room.
Happy Easter to you also!
--
Regards,
Rich
================================
Richard Kleinhenz
================================
