开云体育

At my last job the tractor of a tractor trailer was blocking our loading dock. The driver got into an argement with his dispatcher, left the keys on the seat and stomped off in a huff. No one but me

My truck is also non-synchronous, double clutching is absolutely required. It becomes second nature once you grab ahold of the floor shifter. Dan On Wednesday, March 5, 2025 at 12:20:53 PM EST,

No, I traded it to a WWII reenactor. My father bought the jeep new surplus in 1949. The state decided the original bill of sale was OK for licensing. The jeep ran fine in 1975 when Dad realized he

john23, I uploaded this file: AD8034_differentiator.zip ( /g/electronics101/files/Temp/AD8034_differentiator.zip ) which is in this group's Temp (

The following items have been added to the Files area of the [email protected] group. * /Temp/AD8034_differentiator.zip (

I know what you mean and agree it would be better if a non-standard size. On a practical basis, if someone is paying $20-30 for a battery, it is not left on the kitchen table. These batteries

I get that. But the problem is they are selling them in the AA, C, and D form-factors, where the expected voltage is 1.5 V, not 3.6 V.? That is a catastrophe waiting to happen. Andy

john23, Every time you delete and re-send a message, that is one more message we receive from you. So far I have received 6 messages that you've sent in this topic, but only 2 remain.? You can't

From the datasheet and a few calculations. Your simulation uses +/- 7.5 V power.? Let's assume the output can approach (not reach) the rails.? The output pin sees R2 = 200 ohms to a virtual

Good info. Thanks!

Do you still have the Jeep? I restored a 1939 Plymouth Pickup truck and would love to restore a Jeep. Dan Kahn Newfoundland PA On Tuesday, March 4, 2025 at 03:39:56 PM EST, wn4isx via groups.io

Wiki has an interesting page on submiature RF connectors.... https://en.wikipedia.org/wiki/Hirose_U.FL I had no idea there were so many connectors that look very similar.

Hello Andy , regarding the 200Ohm load,How did you? see that I am over loading the opamp? Could you say what measurement needs to be done and where in the datasheet I need to look for this issue to

In our case it was me who decided "Dear God I've got to downsize!" I had about 30X30X20 in the corner of a warehouse filled with 'stuff.' I even had a WWII era jeep. That was a nightmare to license

That's one heck of a temperature range, there... And a 40 year lifespan? Wow. -- Member of the toughest, meanest, deadliest, most unrelenting -- and ablest -- form of life in this section of

Andy, When that type of performance is needed, it is a custom design project and not for the general public. I do not expect the batteries will be replaced in my lifetime. When the equipment is

Some Panasonic digital cameras are fairly easy to modify. You remove the IR blocking filter from the CCD camera. With this mod you'll get a mix of visible light and IR, I still had the IR passive lens

Agreed. Be aware that you are also over-stressing the op-amp with the 200 ohm load.? That's 37.5 mA peak output, which it might not provide.? But I think that is unrelated to the question. Andy

I wonder if that's true of all of them.? It probably is.? Photons are photons.? I know my first digital almost-SLR from 20+ years ago could, and I considered having the modification done to it.? I

Darn!? All these alternate technologies!? With built-in ways to mess us up. Those Tadiran cells come in standard AA, C, and D form factors, but do NOT have the standard voltage.? Their nominal