I just realized that the problem is likely just the wifi card that the antenna connects to. Problem is that it's likely proprietary and? not obtainable.
toggle quoted message
Show quoted text
On 3/2/2025 10:41 PM, wn4isx via groups.io wrote:
Is the screw on connector mounted on the PCB or is there a jumper?
Most cameras I've worked with have a short, 5" or so, jumper with a press on RF connector on the PCB.
A few have the SMA directly on the BCB and the center connector can come unsoldered or the trace to it break. The break can be so microscopic it might be impossible to see, ohm out with a meter on low ohms, I'd use the diode measurement function.
Good luck. These things can drive a man to distraction.
