Been playing with various chinese-originated latching relay solutions from Amazon. Most are 'overly optimistic' about capabilities. Very 'overly optimistic'. Otherwise the rest have issues operating in environment with heavy canbus, Bluetooth, pwm alternator, 2M xceiver, and brushed engine / HVAC fans.
Reaching way back in my mind, I seem to remember JK flip flops toggling output when strobed if J&K are tied high. Maybe it wasn't JK, but another type? Important points being that outputs are low upon turn on, and stroking with momentary (debounced) switch (high input).
I am thinking that can tie outputs to darlington driver array, like ULN2803 or similar. Up to 1/2A current, 50vdc max, designed for inductive loads. Haven't found any information on temperature control yet.
Not sure if I am reinventing the wheel. I do know that relays / contractors that utilize magnets for latch hold are probitive physically and way overkill.
Incidentally, relay outputs will be controlling multiple isolated power supplies. Need around 16ch of mixed outputs.
Suggestions or alternatives if I am on wrong path?
Tomorrow I will be trying to find 32/64 bit versions of LTSpice (or similar) as my 486DX4 based PC (500MB drive and 8MB Ram!) 16/32bit machine died during Hurricane Beryl.
~SD
