Rectifier not found in TXMLRectList::RectObject()
8
Hi Duncan
I just downloaded and installed this build 75 and on startup I get an error:
Rectifier not found in TXMLRectList::RectObject().
Press OK to ignore and risk data corruption.
Press Abort to kill the program.
Pressing either kills the program.
The old v2.0.2 build 41 works ok on the same pc, and the build 75 has installed to a different folder
Thanks
Simon
|
TRAINING MATERIAL - Video for how to work out rectifier parameters
Hi PSUD users, I've uploaded a video to Youtube which explains how to work out the parameters for solid state and vacuum tube rectifiers. The link is https://www.youtube.com/watch?v=Ku_BmNQKHio Regards, Duncan
|
Swinging chokes
4
Hello Duncan (and everyone else), great tool this PSUD2 - I have been using it for years. Thanks for making it free! I have a query about swinging chokes. One of the webpages (I think its home) you say: "Filter configurations: Simple C filter, C/R/C, C/L/C and LC (swinging choke)." Then in the Help pages, under "Program Limitations" - "Inductance" - it says: "The value of the inductor used in choke power supplies does not vary with DC current, all simulations use a static value. In a real world scenario, the value of the inductor would decrease as the current is increased." I can't find any way of making a choke "swinging" - so I presume this is a feature not yet available - but your intention is to add it at some point? thanks Richard
|
Fw: All sorts of bother...
2
Duncan that's great. I will get back to you on types. BTW do you have a pay-channel for your time and expertise and/or do you know of anyone who does the sort of design for monobloc PSU given a bunch of in /out parameters (I may have said i have bought quite a lot of very expensive components over the years... transformer, ASC caps 10 and 50?F/1200V and the orginal design (Mr Walton Mk2) used the now truly discontinued Plitron 20H/400mA (!) and 10H/150mA for SE 8W 300B/6SN7. Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
|
Rectifier parameter question
2
Duncan,
Hi and thanks. My unfamiliarity with my new MacBook has been overcome with your assistance. PSUD2 (build 75) runs. Hurray! However, I cannot yet achieve usable results. Mathematics is not my issue _ I have for example calculated the Vlaws and Vfacs for several non-listed diodes (but not confident to upload them to the data base.) I can still exceed rectifier max voltages! Partly (maybe) because the programme as downloaded appears to allow only one rectifier block at a time e.g. i do not know how to simulate a CLC filter let alone display chained sections as shown elsewhere on the net.
I'd have several 'rookie' questions to ask to make any further progress - but how much are you up for tutoring cats in the use of your programme?
Siobhan
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
|
Fw: All sorts of bother...
5
Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Tuesday, October 20, 2020 12:49 PM, neutron51493 <neutron51493@...> wrote: Hello A life-long Apple user I now have a MacBook Pro (which, incidentally, I really do not like) running Catalina 10.15.7 (latest incarnation) on which I have attempted to download PSUD2 on a number of occasions ~ and, as with the reports of other potential users, with little inner standing… Rather stupidly I’ve come to realize I was attempting to enlist its help to replace 5ц3с rectifier valves in a "standard Sun Audio 300B type CLC PSU ~ with Vishay Hexfreds (HFA16PB120HN3) which are 16A 1200Vr types purchased some years ago... and I'm completely out of my depth. Today I did manage to override the OSX security warnings (not a recognised developer etc) and managed at least a "look-see" - and to my horror found I would probably fry similar? 1200Vr IXYS diodes. Do we really need 1800Vr (!?) I couldn’t answer that because, no matter what I did subsequently the “security" would not allow PSUD2 to run ~ it came up with another error message about some rectifier or other not being found :- Utilisling the programme is certainly not without difficulties and as others have suggested some more guidance would be very helpful. Otherwise this old Chemistry kid with a very old A level Physics experience and a new soldering station will need to copy established designs - e.g. Dr Jac van Der Walle’s ~ or see expensive things go up in frightening smoke - which is I suppose entirely the reason why such guidance isn’t provided for novices such as myself? Have I answered my own question as far as that aspect is concerned ? Siobhan Sent with ProtonMail Secure Email.
|
Error occurred floating point overflow
5
Getting the above error when trying to run this simulation. Version 2.20 build 74. Thanks.
|
Transformer current high with full-wave
7
Someone posted on Diyaudio about this, but I'm seeing the same thing - with a typical full wave rectifier circuit I'm seeing higher RMS current in the transformer than I think I should be. With a 150mA load, I see 220mA RMS current in D1, and 312mA in T1.
|
UI suggestions
1. PLEASE follow the current / last doc path for File -> Save As. Navigating a directory tree for each revision is silly. 2. PLEASE make the app open in the same location as when closed. Opening in the of the virtual space with multiple monitors is even sillier. Thanks for a G R E A T app!
|
PSUD2 Build 75 released
Build 75 has been released today and is available from the files area: /g/duncanampspsud/files/ Changes: Enhancements to UI to better support dark mode on macOS Improved handling of column widths on the results area, on both auto and manual column sizing
|
Welcome to the group
Welcome to the 开云体育 area for the Duncanamps PSU Designed (PSUD). This is a place to ask questions about the usage of the product, report issues with the software and find out about what's coming up in the future. The current offering is PSUD2 which allows simple linear power supplies to be modelled using a single phase transformer paradigm. The software doesn't cater for regulators, switched mode or anything like that - please check out the excellent LTSpice if you wish to dabble in more advanced power supply modelling. PSUD(2) has been around for 21 years now and that's a long time in the software world. As of June 2020 there is a PSUD3 in the works, it will still have the same simple "world view" of PSUD2 so it's not intended to do much new, just do it better. Some of the key things in the plan for PSUD3: More accurate simulator Vector graphics to take advantage of higher screen resolutions of today XML file format for power supplies which can store chart selections, colours, etc. Rectifier modeller Monte-Carlo simulations Mathematical functions Aggregation functions Windows / Linux / MacOS 64 bit application There isn't an ETA for PSUD3, I've been diverted writing some of the technology to support it and it's not my day job but it will show up one day :) Regards, Duncan
|
81 - 91 of 91