开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Locked Re: RV: PSUDII giving enough power but real world not!!!


 

开云体育

Hi Duncan,

Attached power transformer specs.

Regards
Felipe

De: [email protected] <[email protected]> en nombre de Duncan Munro via groups.io <duncan@...>
Enviado: lunes, 17 de febrero de 2025 14:46
Para: [email protected] <[email protected]>
Asunto: Re: [duncanampspsud] RV: PSUDII giving enough power but real world not!!!
?
Hi Felipe,

Thanks for the feedback. My suggestion would be to measure the voltage before the choke and after the choke, please do these for both on load and off load it might point to what is going wrong.

Regards,
Duncan


On Mon, 17 Feb 2025 at 13:31, felipe cerrillo vindel via <fcv=[email protected]> wrote:
Hi Duncan,

Yes not enough power for my real world circuit, when I use CCS as anode load maximum can get is 26mA so 13mA per channel in place of 30mA per channel.

Thanks & regards
Felipe

De: [email protected] <[email protected]> en nombre de Duncan Munro via <duncan=[email protected]>
Enviado: lunes, 17 de febrero de 2025 14:15
Para: [email protected] <[email protected]>
Asunto: Re: [duncanampspsud] RV: PSUDII giving enough power but real world not!!!
?
Hi Felipe,
?
I ran this circuit with the choke through LTSpice and it gives 323.2 Volts, quite close to the results you are getting from PSUD.
?
PSUD might be getting confused by the very low value or R on the final RC filter (0.75 ohms) but other than that, the results look OK.
?
When you say not enough power, what are you seeing from your real world circuit?
?
Regards,
Duncan
?



--
Duncan Munro

Join [email protected] to automatically receive all group messages.